Further properties
Recommended Printer: -
Single Sided SumiTag Printer STP-SQX-300-S-NC-S
Double Sided SumiTag Printer STP-XD4T-300-S-NC-S
Recommended Ribbon: -
2020 Series Black
Print Performance: -
Adherence: SAE-AS81531-1998 Clause 4.6.2
Fluid Resistance: MIL202 Method 215J 2002
(MIL-M-81531/AS SAE-AS81531-1998 clause 3.4.3)
Store in original packaging
Recommended temp. at +10°C to 25°C 45-55% R.H.
Use within 3 years from date of manufacture
Property | Value |
Continuous Operating Temperature | -30°C to +105°C |
Elongation After Heat Ageing (150°Cx168h) | 250% Min. |
Heat Shock (225°Cx4h) | Pass no crack, flowing or dripping |
Min. Shrink Temp. for full Recovery | +90°C |
Longitudinal Change | +5%, -10% Max. |
Tensile Strength | 13 MPa Min. |
Elongation at Break | 400% Min. |
Oxygen Index | 36% |
Dielectric Strength | 20 kV/mm2 |
Volume Resistivity | 1014 ohm cm |
Nominal ID Supplied mm | Nominal ID Recovered mm | Sleeve Length mm | Markers Across | Markers/Box | Order Code White |
2.4mm | 1.2 | 12.5 | 4 | 4,000 | ZHS-024-125-WE-S-2X |
2.4mm | 1.2 | 25 | 2 | 2,000 | ZHS-024-250-WE-S-2X |
2.4mm | 1.2 | 50 | 1 | 1,000 | ZHS-024-500-WE-S-2X |
3.2mm | 1.6 | 12.5 | 4 | 4,000 | ZHS-032-125-WE-S-2X |
3.2mm | 1.6 | 25 | 2 | 2,000 | ZHS-032-250-WE-S-2X |
3.2mm | 1.6 | 50 | 1 | 1,000 | ZHS-032-500-WE-S-2X |
4.8mm | 2.4 | 12.5 | 4 | 4,000 | ZHS-048-125-WE-S-2X |
4.8mm | 2.4 | 25 | 2 | 2,000 | ZHS-048-250-WE-S-2X |
4.8mm | 2.4 | 50 | 1 | 1,000 | ZHS-048-500-WE-S-2X |
6.4mm | 3.2 | 12.5 | 4 | 4,000 | ZHS-064-125-WE-S-2X |
6.4mm | 3.2 | 25 | 2 | 2,000 | ZHS-064-250-WE-S-2X |
6.4mm | 3.2 | 50 | 1 | 1,000 | ZHS-064-500-WE-S-2X |
9.5mm | 4.75 | 12.5 | 4 | 2,000 | ZHS-095-125-WE-S-2X |
9.5mm | 4.75 | 25 | 2 | 1,000 | ZHS-095-250-WE-S-2X |
9.5mm | 4.75 | 50 | 1 | 500 | ZHS-095-500-WE-S-2X |
For further size properties, please view the full datasheet top right...