HPD Military Specification Sleeve 3:1 (HPD 3:1)

    Double-Sided Printable Heatshrink Sleeves 3:1 Ratio

    HPD Double Sided Printable Sleeves

    Very flexible, high temperature rated, highly flame retardant, UL and CSA recognised heat shrinkable tubing (3:1 shrink ratio). Flexible polyolefin sleeves used for wire identification and insulation purposes. Markers are supplied roll form in a flattened format on a carrier designed for use with double-sided transfer thermal printers. The markers are produced to order in following widths : 10mm - 12.5mm - 16mm - 25mm and 50mm.

    Please enquire if other special lengths are required.

    Main Attributes

    • Flame retardant
    • Self extinguishing

    Further properties

    • Meets NSA937201 Airbus Specification
    • Print onto Paper Liner for QA
    • Easy Pick Application
    • Double sided print enabled
    • Perforation after every sleeve for easy sorting
    • Print performance to Military Specifications
    • 10mm, 12.5mm, 16mm, 25mm & 50mm Lengths
    • Colours - white and yellow as standard

    Industry Standards:

    • NSA 937201MR
    • NSA 937201MT
    • SAE-AMS-DTL-23053/5
    • UL224 VW-1 Flammability
    • REACH Compliant
    • RoHS Compliant

    Additional Information

    Recommended Printer: -

    Double Sided SumiTag Printer STP-XD4T-300-S-NC-S

    Single Sided SumiTag Printer STP-SQX-300-S-NC-S

    Recommended Ribbon: -

    2020 Series Black

    173 Series White

    Print Performance: -

    Adherence: SAE-AS5942

    Fluid Resistance: MIL202 Method 215J

    Store in original packaging

    Recommended temp. at +10°C to 25°C 45-55% R.H.

    Use within 3 years from date of manufacture

    NOTE: HPD-180 series does not dimensionally

    conform to SAE DTL 23053/5A

    Property

    Value

    Continuous Operating Temperature-55°C to +135°C
    Elongation After Heat Ageing (175°C x 168h)100% Min.
    Heat Shock (250°C x 4h)Pass no crack, flowing or dripping
    Min. Shrink Temp. for full Recovery+90°C
    Longitudinal Change+5% to -15% Max.
    Tensile Strength10.3 MPa Min.
    Elongation at Break200% Min.
    Secant Modulus173 MPa Max.
    Flammability60 sec Max. UL 224 vW1
    Voltage Rating600V

    Nominal ID Supplied mm

    Nominal ID Recovered mm

    Sleeve Length mm

    Markers Across

    Markers/Box

    Order Code

    2.4mm0.812.544,000HPD-024-125-WE-S-3X
    2.4mm0.82522,000HPD-024-250-WE-S-3X
    2.4mm0.85011,000HPD-024-500-WE-S-3X
    3.2mm1.112.544,000HPD-032-125-WE-S-3X
    3.2mm1.12522,000HPD-032-250-WE-S-3X
    3.2mm1.15011,000HPD-032-500-WE-S-3X
    4.8mm1.612.544,000HPD-048-125-WE-S-3X
    4.8mm1.62522,000HPD-048-250-WE-S-3X
    4.8mm1.65011,000HPD-048-500-WE-S-3X
    6.4mm2.112.544,000HPD-064-125-WE-S-3X
    6.4mm2.12522,000HPD-064-250-WE-S-3X
    6.4mm2.15011,000HPD-064-500-WE-S-3X
    9.5mm3.212.542,000HPD-095-125-WE-S-3X
    9.5mm3.22521,000HPD-095-250-WE-S-3X
    9.5mm3.2501500HPD-095-500-WE-S-3X

    For further size properties, please view the full datasheet top right...

    • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
    • T: +44 (0) 1843 865241
    • F: +44 (0) 1843 867180
    • info@sei-id.com
    For High Performance Cable Identification
    and protection systems since 1934

    © 2015 SEI Identification Solutions | Powered by SeaPublish