DRD Diesel Resistant Sleeve ()

Double-Sided Printable Heatshrink Sleeves 3:1 Ratio

DRD Diesel Resistant Printable sleeve

Diesel resistant sleeve meet the material and physical property requirements of SEA-AMS-DTL-23053-6 Class 1. The material is a radiation cross linked UV stabilised and printable polyolefin. It complies with SNCF spec NF F00-
608. The markers are printed with thermal transfer printers via Eurolabel printing software. Markers are supplied roll form in a flattened format on a carrier designed for use with double sided thermal transfer printers. Ideally used where resistance to organic fluids, common fuels, lubricants and solvents properties are required. Typical use in mass transit, aerospace, marine and industrial installations.

Main Attributes

  • Flame retardant
  • Self extinguishing

Further properties

  • ALSTOM Approved - DTR Listed
  • Meets SNCF Spec. NF-F00-608
  • Meets SAE-AMS-DTL-23053-6 Class 1
  • EN45545-2 R24 (HL1, HL2 & HL3)
  • Print Performance to Military Standards
  • Ladder format
  • Supplied widths 12.5mm - 25mm - 50mm
  • Colours - white and yellow as standard

Industry Standards:

  • EN 45545-2 R24 (HL1, HL2 & HL3)
  • SNCF NF F00-608
  • BS 4G198, Part 3, Type 10A
  • SAE-AMS-DTL-23053/6
  • REACH Compliant
  • RoHS Compliant

Additional Information

Recommended Printer: -

Double Sided SumiTag Printer STP-XD4T-300-S-NC-S

Single Sided SumiTag Printer STP-SQX-300-S-NC-S

Recommended Ribbon: -

2020 Series Black

Print Performance: -

Adherence: SAE-AS81531-1998 Clause 4.6.2

Fluid Resistance: MIL202 Method 215J

Store in original packaging

Recommended temp. at +10°C to 25°C 45-55% R.H.

Use within 3 years from date of manufacture

Property

Value

Continuous Operating Temperature-55°C to +135°C
Minimum Shrink Temperature for Full Recovery130°C (starts at 100°C)
Heat Shock (250°Cx4h)Pass no crack, flowing or dripping
Longitudinal Change+-10% Max.
Tensile Strength13.8 MPa Min.
Elongation at Break200% Min.
Diesel Oil ResistanceNF F00-608
Secant Modulus172 MPa Min.
FlammabilityFlame ratarded 60 sec Max. ASTM-D2671 (B)

Nominal ID Supplied mm

Nominal ID Recovered mm

Sleeve Length mm

Markers Across

Markers Per Box

Order Code

3.2mm1.125.022,000DRD-032-250-YW-S-3X
3.2mm1.150.011,000DRD-032-500-YW-S-3X
4.8mm1.625.022,000DRD-048-250-YW-S-3X
4.8mm1.650.011,000 DRD-048-500-YW-S-3X
6.4mm2.125.022,000DRD-064-250-YW-S-3X
6.4mm2.150.011,000DRD-064-500-YW-S-3X
9.5mm3.225.021,000DRD-095-250-YW-S-3X
9.5mm3.250.01500DRD-095-500-YW-S-3X
12.7mm6.425.021,000DRD-127-250-YW-S-2X
12.7mm6.450.01500DRD-127-500-YW-S-2X
19.1mm9.525.021,000DRD-191-250-YW-S-2X
19.1mm9.550.01500DRD-191-500-YW-S-2X
25.4mm12.725.02600DRD-254-250-YW-S-2X
25.4mm12.750.01300DRD-254-500-YW-S-2X
38.1mm19.150.01100DRD-381-500-YW-S-2X

For further size properties, please contact us...

  • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
  • T: +44 (0) 1843 865241
  • F: +44 (0) 1843 867180
  • info@sei-id.com
For High Performance Cable Identification
and protection systems since 1934

© 2015 SEI Identification Solutions | Powered by SeaPublish