SNHP 3:1 Cable Sleeves & Sleeving (SNHP)

    Low Fire Hazard Heat Shrinkable Polyolefin 3:1

    Low Smoke Heatshrink

    Manufactured from OSNH Polyolefin, SNHP 3:1 Cable Sleeves and Sleeving are for use in areas where low fire hazard properties are mandatory, particulary mass-transit and underground areas. SNHP 3:1 Cable Sleeves and Sleeving will operate in the temperature range -40°C to +105°C.

    Main Attributes

      Further properties

      • Flame Retardant
      • Low Smoke
      • Zero Halogen
      • Self Extinguishing
      • London Underground Approved
      • Available in 6 Standard Colours
      • 115°C Minimum Shrink Temperature

      Industry Standards:

      • EN 45545-2 R24 (HL1, HL2 & HL3)
      • LUL 1-085
      • LUL 2-01001-002 (E1042A6)
      • BS6853 Cat. 1a
      • BS 6746 C
      • International RCC Markers
      • BS 4G198, Part 3, Type 15
      • DEF STAN 59-97, Type 8
      • REACH Compliant
      • RoHS Compliant

      Application Method

      Shrink on

      SNHP 3:1 Cable Sleeves and Sleeving are usually shrink fitted using a heatgun, oven or shrink tunnel. If possible, select an 'Expanded I/D' large enough to achieve a good degree of recovery when shrunk.

      Bulk packed as standard; also available packed to your requirements. SNHP 3:1 Cable Sleeves and Sleeving is available as cut sleeves and continuous sleeving.

      Available Colours

      Black

      Brown

      Red

      Orange

      Yellow

      Green

      Blue

      Violet

      Grey

      White

      Property

      Value

      Temperature Range-40°C to +105°C
      FlammabilitySelf Extinguishing
      Toxicity Index (D.Stan)0.938
      Smoke Index (D.Stan)5.6
      Oxygen (D.Stan)36
      Flame Temp Index355
      Tensile Strength7.0 MPa
      Elongation At Break200%
      Chemical ResistanceG198/DS 59-97 Fair
      Max. Longitudinal Change, typically+0%, -5%

      PRODUCT REFERENCE

      EXPANDED ID BORE MIN. (MM)

      RECOVERED ID BORE MAX. (MM)

      RECOVERED WALL NOMINAL (MM)

      COLOUR CODE

      FORM

      SNHP15/051.50.50.50BK = BlackContinuous sleeving
      SNHP30/103.01.00.60BN = BrownSlit Cut
      SNHP60/206.02.00.70RD = RedPar-O-Cut
      SNHP90/309.03.00.80ORN = OrangeMarkers
      SNHP120/4012.04.00.85YW = YellowResistor Colour Coded
      SNHP180/6018.06.01.00GN = GreenKit Boxes
      SNHP240/8024.08.01.20BE = BlueKit Boxes
      SNHP400/13040.013.01.25VT = VioletKit Boxes
      GY = Grey
      WE = White

      Many other standard and bespoke sizes available.


      • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
      • T: +44 (0) 1843 865241
      • F: +44 (0) 1843 867180
      • info@sei-id.com
      For High Performance Cable Identification
      and protection systems since 1934

      © 2015 SEI Identification Solutions | Powered by SeaPublish