SDWP 3:1 Cable Sleeves & Sleeving (SDWP)

    Heat-Shrinkable 3:1, Dual Wall Polyolefin (With Adhesive)

    Manufactured from OSDW (3:1). This irradiated cross-linked, semi rigid polyolefin material is rated at 125°C. As SDWP 3:1 Cable Sleeves and Sleeving shrinks the inner adhesive liner melts and flows to seal and encapsulate components or splices contained within. The unique clear material may be used when encapsulation and see-through inspection are required.

    Main Attributes

      Further properties

      • Strong Adhesive Inner Lining
      • Good Fluid Resistance
      • Moisture Protection
      • Environmental Sealing
      • Flame Retardant (Jacket)
      • Flexible

      Industry Standards:

      • REACH Compliant
      • RoHS Compliant

      Application Method

      Shrink on

      SDWP 3:1 Cable Sleeves and Sleeving are usually shrink fitted using a heatgun, oven or shrink tunnel. If possible, select an 'Expanded I/D' large enough to achieve a good degree of recovery when shrunk.

      SDWP 3:1 Cable Sleeves and Sleeving is available in 1.2m lengths, or as cut sleeves where they sometimes are used in place of shapes

      Available Colours

      Black

      Transparent

      Property

      Value

      Temperature Range-50°C to +110°C (jacket only)
      Shrink Temperature125°C
      Tensile Strength9,000 kNm2 /min
      Elongation at Break250% minimum
      Max Longitudinal Change +/- 10%
      FlammabilitySelf Extinguishing (jacket only), except clear.
      Fluid ResistanceGood : Iso-octane/Toulene, Kilfrost, D.Stan 91-48
      Dielectric Strength, typically30kV/mm
      Low Temperature Flexibility-55°C

      PRODUCT REFERENCE

      EXPANDED ID BORE MIN. (MM)

      RECOVERED ID BORE MAX. (MM)

      RECOVERED WALL + ADHESIVE (MM/NOMINAL)

      COLOUR CODE

      FORM

      SDWP30/103.01.00.96BK = BlackContinuous sleeving
      SDWP60/206.02.01.19TR = TransparentPar-O-Cut
      SDWP90/309.03.01.27Kit Boxes
      SDWP120/4012.04.01.39Kit Boxes
      SDWP190/6019.06.01.80Kit Boxes
      SDWP240/8024.08.02.50
      SDWP400/13040.013.02.50

      Many other standard and bespoke sizes available.


      • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
      • T: +44 (0) 1843 865241
      • F: +44 (0) 1843 867180
      • info@sei-id.com
      For High Performance Cable Identification
      and protection systems since 1934

      © 2015 SEI Identification Solutions | Powered by SeaPublish